Marine Electrical Course
Level 2
Learn about installation, maintenance, safety, and fault finding on more advanced marine electrical systems.
Note Level 1 required this can be added on during checkout.
Aligned with industry standards:
ABYC E11 - BS EN ISO 13297 - IEC 60029 (507) - AS/NZS 3004.2
The Level 2 course allows you to leverage the concepts from MECO Level 1 Course and learn the finer points of more complex areas of the marine electrical system.
Each module is packed with practical tips and step-by-step guides, ensuring that you can apply what you've learned immediately, whether you're assessing wiring onboard or troubleshooting a fault.
Upon completion of the final MET written exam you can achieve your Marine Electrical Technician Level 2 MET 2 card. This is an industry recognised licence that enables you to find work in the marine electrical sector.
- Pre-course requirements: Level 1
- Recommended study time: 2 days
- Certification (personal use): Course completion
-
Certification (professional use): MET 2 Certificate
Yacht Electrical Level 2
Available in
days
days
after you enroll
- Introduction
- Batteries C Rates (21:17)
- Batteries CCA
- Battery Types
- Battery Charging
- DC Circuit Protection (18:04)
- Alternator External Regulators
- Multiple Alternators (8:37)
- Solar Power (12:17)
- Wind Turbines (7:04)
- AC Shore power (14:42)
- Electrical Essentials
- Power Factors
- Transformers (11:38)
- AC Circuit Protection (26:09)
- Inverters (9:08)
- Generators
- Galvanic Action & Cathodic Protection (11:35)
- Isolation Transformers (4:30)
- Electrolytic Corrosion (6:17)
- Refrigeration (11:55)
- Water Makers (6:13)
- VHF Radio (8:03)
- Crimping Larger Cables (4:25)
- Boat & Yacht Electrical Exam Preparation